How to Use the Hot Tub at Wander Vail Valley
Ready to dip in the tub? Check this guide first.
Would there be anything more relaxing than enjoying the majestic mountain views from a hot tub in Wander Vail Valley? Read on to get started!
Open the hot tub cover by lifting it. You can unlock and access the controls by touching the logo icon and dragging it to the reverse logo icon. When the touch control is not used for 30 minutes, it will automatically shut off.
How to activate and prime the jets
Press the Jets 1 button once to prime the pumps in low-speed mode. Wait a few seconds after the pump comes on and water is visible pouring from the jets before pressing Jets 1 again to activate the high-speed operation of Pump 1. You can do the same for Jets 2.
How to change the temperature
The water temperature display will appear within one to two minutes after spa start-up and initialization. Tap the arrows up (warm) or down (cool) on the Spa Control Panel to set your preferred temperature. Setpoints are displayed in blue. If the temperature remains unchanged for three seconds, the current temperature will reappear in white.
At the bottom of the screen, Cooling to xx.x appears if the set value is lower than the current temperature, and Heating to xx.x if it's higher. The heating starts after a short delay, during which Heating suspended is displayed under the value.
Quick Tip: For easier viewing inside the spa, tap the Invert button to invert the display image.
How to activate the light
Press the Lighting Menu/Bulb button to access the menu. To turn on exterior lights, press the dim up and down buttons. Use the appropriate menu options to change interior light modes (flashing, fading, solid color).
Once you're done, turn off the jets and place the cover back up. For detailed visual instructions, check out this video here and this user manual here.
Hot tub cleaning and maintenance
We regularly service the hot tub's water between guests' turnovers to ensure it remains clean and healthy. This includes chemical balancing (chlorine/bromine and other chemicals), skimming, vacuuming, and tub brushing & filter cleaning as required. Rinsing off before you go to the hot tub could also help us clear the water of impurities for you and your crew!
If the water seems cloudy or murky, nothing to worry about! Once you switch the hot tub on, the pumps and filters will activate, and with the help of sanitizing agents, it will clear the water up!
Once that’s done, check out the list of activities to explore, whether you’re in town during winter months or lean summer season – or text Wander Concierge through the app for more travel tips and insights!