How to Use the Hot Tub at Wander Anchor Cove
Ready to dip in the tub? Check this guide first.
Would there be anything more relaxing than enjoying the majestic ocean views from a hot tub in Wander Anchor Cove? Read on to get started!
How to pumps and air blower
The hot tub cover lifts up, and you'll see the control panel once the cover is off. Press Jets 1 button once to prime in low-speed mode. Wait a few seconds after the pump comes on and water is visible pouring from the jets before pressing Jets 1 again to activate the high-speed operation. You can do the same for Jets 2.
Note the pumps will turn off on their own after about 20 minutes. But if you're not done using the jets yet, just turn the pump back on, and you're good to go!
If you want to get some air circulation going in the seats and footwell, just hit the Blower button. You'll see little bubbles symbol on the screen to let you know it's working. And don't worry about forgetting to turn it off — the timer will do that for you after 20 minutes.
How to change the temperature
You can see the current temperature of the hot tub water on the LCD display. Tap the arrows up (warm) or down (cool) on the control panel to set your preferred temperature.
Make sure to turn on the “STANDARD” mode by pressing the Mode button or hand icon on the panel to heat the spa.
It's good to note that the maximum temperature it can go is as low as 80 ˚F and as high as 104 ˚F. Also, turning up the heat all the way up won't make it heat up faster — it'll just make it hotter in the end.
Quick Tip: For easier viewing inside the spa, tap the Invert button on the lower right to invert the display image.
How to activate the light
Press the Light button to turn on the footwell, waterfall and air control LED lights. If you want the light to be less bright, just press the button on the sensor pad. If you press it a third time, the light will get even dimmer and if you press it a fourth time, it'll shut off. In case you left them on, the lights are programmed to turn off automatically after 2 hours.
You can check out the user manual here to learn more about the hot tub features and controls.
Hot tub cleaning and maintenance
We regularly service the hot tub's water between guests' turnovers to ensure it remains clean and healthy. This includes chemical balancing (chlorine/bromine and other chemicals), skimming, vacuuming, and tub brushing & filter cleaning as required. Rinsing off before you go to the hot tub could also help us clear the water of impurities for you and your crew!
If the water seems cloudy or murky, nothing to worry about! Once you switch the hot tub on, the pumps and filters will activate, and with the help of sanitizing agents, it will clear the water up!
Once that’s done, check out the list of activities to explore, whether you’re in town during winter months or lean summer season – or text Wander Concierge at +1-737-377-3205 for more travel tips and insights!